220V IR PIR Motion Senser Switch Module Body Control Switch Auto On Off Lamps Lights

Based on infrared technology automatic control product, when some people enter the switch induces the scope, the special-purpose sensor surveys the human body infrared spectrum the change, the switch automatic connection load, the human does not leave the induction scope, the switch continually puts through; After the human leaves, switch time delay automatic shut-off load. Is bright the human to the lamp, the human extinguishes to the lamp, kind convenient, safe energy conservation. Bipolarity design:With ordinary wall switch (three connections), load capacity 100W. Completely automatic induction: The human comes the switch to put through immediately, after the human leaves the time delay automatic shut-off.,Relay switch:Connection load strength, relay switch service life 100,000 times. Automatic light measuring: light strong when does not induce (exwork establishment), has the photosensitivity adjustment (also to be possible to adjust under random light induces or the all-weather induces).,Automatic stochastic time delay(May sequential time delay way): the human in the induction scope activity, the switch always puts through, leaves the only then automatic shut-off after the human. Has in addition may the sequential time delay way (be possible to elect). Ultra low power loss: switch own power loss<0.20 (year consumes electricity< 0.14 kwh), compared to other brand similar product electricity saving.,Anti-radar function: Ad hoc anti-radar component, but prevented effectively the thunder and lightning and so on the instantaneous high pressure the harm which creates to the switch. Operating voltage: AC 110V-220V, DC 12V-24V.Load power: 25-100W. Static power: <0.20W.Delay time: 60s. Sensing range: <8m. Work environment: -20℃-50℃. The distance between switch and lamps: 0.5M. Size: 8.8cm x 8.8cm x 3cm - 3.46inch x 3.46inch x 1.18inch.