MCP2551 High-Speed CAN Protocol Controller BUS Interface Module

product description The 2551 is a fault tolerant high speed CAN device that acts as a CAN protocol controller and physical bus interface. The MCP2551 provides differential transceivers for CAN protocol controllers, including 24V voltage requirements. Normally, every node on the CAN system must have a device that converts the digital signal generated by the CAN controller into a signal suitable for bus transmission. It also adds a buffer between the CAN controller and the high-voltage spikes on the CAN bus, possibly generated by external devices. Support 1MB / S boot rate. Color: purple MCP2551 High Speed CAN Communication Protocol Controller Bus Interface Module For 12V and 24V systems. External control of slopes to reduce RFI. Automatic detection of a ground fault on the TXD input. Power-on reset and voltage event undervoltage protection. No power-on node or brown-out will not affect the CAN bus. Low current standby operation. Up to 112 nodes can be connected. Package Contents: 2x module Note: Light photography and different displays may cause items in the picture to differ in color from the real thing. Measurement tolerance is +/- 1-3cm.