Bluetooth 4.0 BLE CC2541 Ibeacon compatible with HM-10

Bluetooth 4.0 BLE CC2541 Ibeacon compatible with HM-10

main feature: 1. Simple to use, without any Bluetooth protocol stack experience; 2. User Interface Universal Serial Design, full duplex two-way communication; 3. Support bridging mode (serial transparent transmission), or direct drive mode (no additional CPU required); Default connection interval of 20ms, fast connection; 5. Support AT commands to modify the baud rate, software reset module, access to MAC address, modify the module name; 6. Support AT commands to adjust the Bluetooth connection interval, control the different forwarding rate. (Dynamic Power Adjustment); Serial data packet length, can be less than 200byte (including 200) length. (Bales automatically distributed); 8. High-speed transparent transmission rate up to 4K / S, stable at 2.5K-2.8K; 9. Support mobile device APP to modify the name of the Bluetooth module, power-down save; 10. Support mobile device APP to modify the baud rate, power-down save; 11. Support mobile device APP module for remote reset; 12. Support for mobile APP to adjust the Bluetooth connection interval, not saved. (Dynamic Power Adjustment); 13. Supports fast test, no need to connect any external device to test wireless and serial communication; 14. Includes debug port including a complete IO external extension; 15. Support connection status, broadcast status prompt pin / General IO flexible configuration; 16.6 bidirectional programmable IO, external interrupt trigger input detection, all low-power operation. (Trigger alarm, lighting Control, remote control toys and other input and output switching applications); 17.2 Single Programmable Timer / Period Invert Output Port. (Smart appointment time application); 18. Two ADC inputs (14 bits), enable / disable, freely configurable sampling period. (Humidity, temperature, luminosity, etc. should be Use); 19. Four programmable PWM (120Hz) outputs. (Dimming, control and other applications); 20. RSSI continuous acquisition module side, read automatically notify the APP, enable / disable, free to set the acquisition frequency. (Find Anti-lost alarm); 21. Support module power indicator, power read, can be automatically notified. (Equipment power alarm); 22. support anti-hijack password settings, modify and restore, to prevent malicious third-party connections. May not be used. independent Password operation result notification, convenient APP programming; 23. A low-power standby mode, the CC2540 chip sleep current official data 0.4uA, the measured power module is as follows: * 1 Note: The official test mode: In the power loop resistor string 10R, use the oscilloscope to intercept the waveform drop, Points calculation. * 2 NOTE: Multimeter test mode: Use the multimeters uA or mA profile string view to display the values ??between the cell and the module. The test voltage is 3.07V.