AC to DC Power Supply 220V AC to DC 12V 30A For 3D Printer

Product description
Size:12V 30A Silvery

Parameter
Input: AC110V/220V 50/60Hz
Output : DC 12V 30A 360W max
Fix Screw Hole Diameter: 2.5mm (0.1inch)
Working temperature: -10 to 50 degree Celsius
Storage temperature: -20 to 60 degree Celsius
Environmental humidity: 10-95%
Material: Metal, Electronic Parts
Safety Compliance: CCC/ FCC / CE

Connection instruction
L/N: AC power input
+V: DC power output “+”
COM: DC power output “-“
+V ADJ: Adjust the output voltage (15%)

Kindly note
1) High Voltage inside, do not remove the cover.
2) 110V/220V must be selected by switch before using to avoid damaging. Please set the switch to 110V for USA.
3) It comes without installation instruction, wiring cable, on/off switch and screws. Professional Installation of qualified electrician is highly recommended.
4) The power supply fan does make a noise and the speed of the fan is load based. So the higher the load, the faster the fan runs, the louder the noise.

Package included
1 x LED Switching Power Supply