3 in 1 2.4G Wireless Duo Shock Game Controller For PS2 joystick joypad

Description: Install the battery: Remove the battery compartment cover under the controller. Insert 4 AAA batteries (not included) and observe the polarity markings in the compartment. Close the lid. Connect the controller to the console: 1. Make sure the console is turned off. Plug the receiver into the port on the front of the console and open the console. 2. Turn the power switch under the controller on. When the controller is connected, the receiver light flashes, which may take 20 seconds. Do not move the lever or press any button at this time. 3. The controller is ready for use when the receiver LED remains lit. Precautions: 1. To save the battery, turn off the controller after use. 2. To extend the battery life during playback, turn off the vibration. Important safety precautions: 1. If you feel pain, weakness, numbness or tingling on your wrist, elbow or shoulder when using this product, stop using it until symptoms have subsided. 2. Play about 15 minutes per hour, often take a break. Package Included: 1 PS3 / PS2 / PC 2.4G wireless dual shock game controller