product description
* Type: Professional amplifier * Channel: 2 (2.0) * Chip: TDA7492 * Power: Digital Amplifier Board 50W * 2 / 100W * High-speed SMT placement machine, over-temperature reflow, the performance is very stable, non-manual welding process can be compared with the four groups to adjust the gain. * Small size of the 70X57MM can be used to repair, polishing the speakers, improve sound quality, you can also use more than one block into a multi-channel amplifier. * 2.1 Amps, use a lot. * Has a strong output short circuit and over temperature overload protection, to prevent the impact of switching machine. caveat: * Note: When the speaker impedance is 4 ohms, the working voltage must be less than 18V, the speaker impedance is 6 ohm, the working voltage can not exceed 24V, the speaker impedance is 8 ohm, the working voltage can not exceed 26V, and the polarity of the power should not be reversed. * Size: about 71.7MM * 60.11MM * 31.43MM. product information Project weight 3.2 ounces Package dimensions 7.7 x 5.5 x 1.5 inches
Hot ProductsNew Products For March
Recently Viewed
Related Product    |
